2014 Ic Bus CeCE SERIES SCHOOL

Navistar, Inc. is recalling certain model year 2007-2015 IC CE transit buses, 2008-2011 IC FE transit buses and 2009-2013 IC RE transit buses equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts by Ricon. The affected lifts are equipped with folding link arms that may have pivot holes that are too big, allowing the bearings to move out of position.

Navistar, Inc. (Navistar) is recalling certain model year 2011-2016 IC Bus CE transit buses manufactured July 1, 2010, to February 4, 2015, and one IC Bus BE transit bus manufactured on November 2, 2010. The affected vehicles have a water shutoff valve, inside, forward of driver heater (feature code 48PPJ or 48PPP) that has a formed heater hose that over time, may fatigue and split resulting in hot engine coolant fluid leaking into the driver's foot area.

Navistar, Inc.(Navistar) is recalling certain model year 2007-2015 IC CE transit buses manufactured January 23,2006, to May 12, 2014, 2008, and 2011 IC FE transit buses manufactured October 5, 2006, to September 28, 2009, and 2009-2010, and 2013 IC RE transit buses manufactured September 19, 2007, to November 29, 2011, equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts manufactured by Ricon Corporation after January 1, 2006. The platform side plate of the affected wheelchair lifts may crack.

Navistar Inc. (Navistar) is recalling certain model year 2010-2011 IC bus 3200, model year 2012 and 2014 IC bus CE and model year 2011-2013 IC bus HC transit buses and model year 2008-2013 International 4300 and model year 2013 International Workstar commercial trucks equipped with Eaton hybrid automated transmissions. The software controlling the affected transmissions may improperly raise the vehicle's engine speed during downshifts without the driver's input.

Navistar Inc. is recalling certain model year 2014-2015 IC Bus CE and model year 2014 IC Bus RE transit buses manufactured August 12, 2013, through November 14, 2013 and equipped with IMMI-brand L9 seat belt buckles. When the button is pressed to release the seat belt, the latch plate can become partially engaged with the buckle, making the seat belt difficult to unlatch. Thus, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 209, "Seat Belt Assemblies."