1998 Jeep WranglerSPORT

CERTAIN AFTERMARKET BRAKE HYDRAULIC MASTER CYLINDERS SOLD AS REPLACEMENT BRAKE CYLINDERS FOR CERTAIN FORD, DAIMLERCHRYSLER, AND JEEP PASSENGER VEHICLES. THESE BRAKE CYLINDERS WERE SOLD UNDER THE BRAND NAMES OF NAPA, RAYBESTOS, AIMCO, AC DELCO, CARQUEST, BENDIX, AND WAGNER. ONLY PRODUCTS THAT WERE MANUFACTURED FROM JULY 27, 2005 THROUGH JANUARY 17, 2006 (DATE CODES 0529 THROUGH 0602) ARE SUBJECT TO THIS RECALL. WHEN SUBJECT TO VERY COLD TEMPERATURES, AN INTERNAL SEAL IN THE MASTER CYLINDER COULD LOSE FLEXIBILITY AND MAY CAUSE BRAKE FLUID TO LEAK.

CERTAIN PRO-A MOTORS CORNER LAMPS, TURN SIGNALS, AND HEADLIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.

CERTAIN AFTERMARKET AIRTEX ELECTRIC FUEL PUMPS INSTALLED FOR USE AS REPLACEMENT EQUIPMENT FOR CERTAIN 1997-2004 JEEP WRANGLER; 1997-2001 JEEP CHEROKEE; 1997-2004 JEEP GRAND CHEROKEE; AND 2000-2003 DODGE DAKOTA VEHICLES. THE PLASTIC ELECTRICAL GROMMET CONNECTORS AT THE TOP OF THE FUEL PUMP MODULE ARE NOT COMPATIBLE WITH AUTOMOTIVE FUELS AND MAY DEGRADE CAUSING A POTENTIAL LEAK PATH FOR FUEL.

BESTOP AFTERMARKET REAR SHELL ROOF RACKS,MANUFACTURED BETWEEN APRIL 27 AND MAY 20, 2004, DESIGNED FOR USE WITH THE BESTOP HARDTOP MADE FOR THE 1986-1995 AND 1997-2003 JEEP WRANGLER. THE COCKPIT COVER MAY NOT STAY LATCHED TO THE ROOF RACK BECAUSE THE LATCH BRACKET MISPOSITIONS THE ROTARY LATCH TO THE COCKPIT COVER. AS A RESULT, THE COCKPIT COVER MAY NOT STAY LATCHED TO THE ROOF RACK AND COULD SEPARATE FROM THE ROOF RACK. THIS RECALL ONLY PERTAINS TO AFTERMARKET REAR SHELL ROOF RACKS AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON JEEP WRANGLER VEHICLES BY DAIMLERCHRYSLER.

VEHICLE DESCRIPTION: MULTI-PURPOSE PASSENGER VEHICLES. THE POWER BRAKE BOOSTER VACUUM RESERVOIR DIAPHRAGM CAN SPLIT OR TEAR.

VEHICLE DESCRIPTION: MULTI-PURPOSE PASSENGER VEHICLE. THE FRONT SEAT BELT SHOULDER TURNING LOOP ANCHORS WERE NOT PROPERLY HEAT TREATED AND ARE NOT PROPERLY HARDENED.